Cart 0

How Much Does a Heat Pump Cost? 2026 Price Guide

How much does a heat pump cost? In 2026, a typical air-source heat pump costs $1,500 to $7,500 for equipment alone and $5,000 to $20,000 installed, depending on type, size, and efficiency. Ductless mini splits start lower, while geothermal systems run highest. Some state, utility, and income-qualified federal rebate programs can reduce the net cost […]
Heat pump cost guide showing equipment and installation pricing for residential HVAC systems in 2026.

How much does a heat pump cost? In 2026, a typical air-source heat pump costs $1,500 to $7,500 for equipment alone and $5,000 to $20,000 installed, depending on type, size, and efficiency. Ductless mini splits start lower, while geothermal systems run highest. Some state, utility, and income-qualified federal rebate programs can reduce the net cost for qualifying units.

Modern residential heat pump outdoor condenser installed on a concrete pad beside a stucco home with professionally landscaped surroundings.

A premium residential heat pump outdoor unit installed on a concrete pad with clean landscaping for efficient year-round heating and cooling.

That range is wide because “heat pump cost” actually covers two very different numbers: the price of the equipment itself, and the price of a professional installation. Conflating the two is the single biggest reason homeowners feel blindsided by quotes. In this guide, we separate the two clearly so you know exactly where your money goes, and where you can save the most by sourcing equipment directly.

National Air Warehouse sells heat pumps at manufacturer-direct, wholesale pricing with free shipping, so we have a transparent view of what the hardware truly costs before a contractor’s markup and labor are layered on top.

Equipment Cost vs. Installed Cost: Why They’re Different

When you read that a heat pump “costs $12,000,” that figure almost always refers to a fully installed system from a local HVAC company. That number bundles together:

  • The equipment (the heat pump itself, plus an air handler or coil)
  • Labor (typically 40-60% of an installed quote)
  • Materials (refrigerant lines, electrical, pads, disconnects, thermostats)
  • Permits and inspection fees
  • Contractor overhead and margin

The equipment is the only part with a fixed, knowable market price. Labor varies enormously by region, season, and contractor. When you buy the equipment yourself at wholesale and pay separately for installation labor, you gain visibility into both numbers, and you cut out the markup most contractors add to the hardware they resell.

Cost componentShare of typical installed quoteWho controls it
Heat pump equipment35-50%The market (you can shop this)
Labor40-60%Local contractor
Materials & accessories5-15%Job-specific
Permits/inspection1-5%Local jurisdiction

The takeaway: the equipment is the one line item you can comparison-shop. Browse current pricing on our heat pumps and ductless mini split collections to see real wholesale numbers.

Heat Pump Cost by Type

There are four common heat pump categories, and they sit at very different price points.

Air-Source Ducted Heat Pumps

The most common whole-home option. These pair an outdoor condenser with an indoor air handler and use existing or new ductwork. They’re the direct replacement for a traditional split AC + furnace setup.

Ductless Mini Split Heat Pumps

Ductless systems use one outdoor unit connected to one or more wall-mounted indoor heads. They’re ideal for homes without ducts, additions, garages, or zoned comfort. Single-zone units are among the most affordable heat pumps to buy and install; multi-zone systems cost more.

Geothermal / Ground-Source Heat Pumps

These exchange heat with the ground via buried loops. They deliver the best efficiency and lowest operating cost of any type, but the ground-loop excavation makes them by far the most expensive to install.

Package Units

A self-contained outdoor unit (often rooftop or on a slab) that combines all components in one cabinet. Common in homes with limited indoor mechanical space and in light commercial settings.

White ductless mini-split indoor air handler mounted high on a light gray wall in a bright modern minimalist living room.

A sleek ductless mini-split indoor unit blends seamlessly into a modern minimalist living room while providing efficient climate control.

Heat pump typeEquipment onlyInstalled (typical)
Ductless mini split (single-zone)$1,000 – $3,500$3,500 – $8,000
Ductless mini split (multi-zone)$3,000 – $8,000$8,000 – $18,000
Air-source ducted$2,500 – $7,500$6,000 – $18,000
Package heat pump$3,000 – $7,000$7,000 – $16,000
Geothermal / ground-source$5,000 – $12,000 (equipment)$18,000 – $45,000+

Ranges reflect typical 2026 U.S. pricing and vary by brand, capacity, efficiency, and local labor. Geothermal installed cost is dominated by ground-loop excavation, which is highly site-specific.

Infographic comparing equipment-only and fully installed costs for ductless mini split, air-source ducted, package unit, and geothermal HVAC systems in 2026.

Compare equipment and installation costs for the most common residential HVAC systems in 2026.

Heat Pump Cost by Size (Tonnage)

Heat pumps are sized in tons of cooling capacity, where 1 ton equals 12,000 BTU/h. Residential systems typically range from 1.5 to 5 tons. A rough rule of thumb is 400-600 square feet per ton, but proper sizing requires a Manual J load calculation, not square footage alone. Oversizing is a common and costly mistake that hurts comfort and efficiency.

As capacity rises, so does equipment cost. The table below shows approximate equipment-only pricing for air-source ducted systems at a mainstream efficiency level.

Size (tons)Approx. BTU/hTypical home size*Equipment onlyInstalled (typical)
1.5 ton18,000600-900 sq ft$2,200 – $4,000$5,000 – $9,000
2 ton24,000900-1,200 sq ft$2,500 – $4,500$5,500 – $10,500
2.5 ton30,0001,200-1,500 sq ft$2,900 – $5,200$6,500 – $12,000
3 ton36,0001,500-1,800 sq ft$3,300 – $5,800$7,500 – $14,000
4 ton48,0001,800-2,400 sq ft$4,000 – $6,800$9,000 – $16,500
5 ton60,0002,400-3,000 sq ft$4,500 – $7,500$10,500 – $18,000

*Home-size estimates are climate-dependent and for illustration only. Always size with a Manual J calculation.

How SEER2 and HSPF2 Efficiency Affect Price

Efficiency ratings are the biggest equipment-cost lever after size. As of 2023, the U.S. uses updated SEER2 (cooling) and HSPF2 (heating) metrics, which test under more realistic conditions than the older SEER/HSPF standards.

  • SEER2 measures cooling efficiency. Higher is better. Current federal minimums are roughly 13.4-15.2 SEER2 depending on region, and premium systems reach the low-to-mid 20s.
  • HSPF2 measures heating efficiency. Higher is better, with typical residential heat pumps ranging from about 7.5 to 10+ HSPF2.

Higher-rated systems often use variable-speed (inverter) compressors that modulate output instead of cycling on and off. They cost more upfront but run quieter, hold temperature more steadily, and use less electricity, which lowers operating cost over the system’s life.

Efficiency tierApprox. SEER2Compressor typeRelative equipment cost
Standard14 – 16Single-stage$ (lowest)
Mid / value16 – 18Two-stage$$
High-efficiency18 – 22+Variable-speed inverter$$$

Importantly, the higher-efficiency tiers are also the ones most likely to qualify for state and utility rebate programs, which can offset much of the price premium. See the official ENERGY STAR heat pump guidance for current qualifying criteria.

What Drives Heat Pump Installation Cost

Two homes can buy the identical heat pump and pay very different installed prices. Labor and job complexity are why. The main factors:

  • Ductwork. Adding or replacing ducts is one of the largest cost adders. Ductless systems avoid this entirely.
  • Electrical work. A new circuit, panel upgrade, or service increase adds cost, especially when moving off a gas furnace.
  • Removal and disposal of the old system.
  • Line-set length and routing, plus refrigerant charge.
  • Backup or auxiliary heat (electric strips or a dual-fuel furnace pairing) in cold climates.
  • Local labor rates and permits, which vary widely by region.
  • Season. Off-peak (spring/fall) scheduling can mean better contractor availability and pricing.

Contractors buying for multiple jobs can keep equipment costs down by sourcing wholesale. NAW’s contractor pricing program is built for exactly that, and DIY-capable homeowners can buy the same equipment direct and hire out only the labor that legally requires a licensed pro (refrigerant handling and electrical work, in particular).

Rebates and Incentives in 2026

Incentives can meaningfully reduce your net cost, but the landscape changed in 2026.

Update

The federal 25C tax credit (Energy Efficient Home Improvement Credit), which previously offered qualifying air-source heat pumps a credit of 30% of project cost up to $2,000 per year, expired December 31, 2025 under the One Big Beautiful Bill Act. It no longer applies to equipment placed in service in 2026 or later, regardless of purchase date.

What’s still available: the income-qualified federal Home Electrification and Appliance Rebates (HEAR) program, funded through direct grants to state energy offices rather than the tax code, remains active in states that have launched it and can offer meaningful support toward a qualifying heat pump for eligible households. Many states and utilities also run their own rebate programs, and these vary by location and change often. Check your state energy office and utility for current programs.

For authoritative, up-to-date details, see ENERGY STAR’s federal tax credit page and the U.S. Department of Energy’s heat pump resources. Tax situations differ, so consult a tax professional and confirm with your utility before assuming a specific incentive applies to your purchase.

Heat Pump Operating Cost vs. a Gas Furnace

Upfront price is only half the story. Because a heat pump moves heat rather than burning fuel to create it, a modern unit can deliver 2-4 units of heat energy for every unit of electricity it consumes, far more efficient than the laws of combustion allow.

Whether a heat pump is cheaper to run than a gas furnace depends on local electricity and gas prices and your climate. In moderate climates and in regions with reasonable electricity rates, heat pumps frequently cost less to operate than gas heat. In very cold climates or areas with cheap natural gas and expensive electricity, a dual-fuel setup (heat pump plus a gas furnace as backup) can be the most economical approach. Cold-climate heat pumps have also improved dramatically and now maintain strong output well below freezing.

How to Save the Most on Your Heat Pump

  1. Buy the equipment at wholesale. The hardware is the one cost you can comparison-shop. Sourcing direct removes the contractor’s resale markup on the unit.
  2. Right-size it. Insist on a Manual J load calculation. An oversized system costs more and performs worse.
  3. Match efficiency to your climate and any current rebate programs. A higher SEER2/HSPF2 unit that qualifies for a state, utility, or income-qualified rebate can pay back its premium faster.
  4. Get labor-only quotes. When you supply the equipment, you can solicit installation-only bids and compare labor on an apples-to-apples basis.
  5. Stack incentives. Combine any available state or utility rebates with the income-qualified federal HEAR program if you qualify.
  6. Schedule in the off-season for better availability and pricing.

Ready to see real numbers? Browse heat pumps at National Air Warehouse for manufacturer-direct pricing with free shipping, or explore the full shop to compare systems by type, tonnage, and efficiency.

How much does a heat pump cost installed in 2026?

A typical air-source ducted heat pump runs about $6,000 to $18,000 installed, with most homeowners landing in the $8,000-$14,000 range. Equipment alone is roughly $2,500-$7,500. Ductless mini splits can start lower; geothermal systems run highest.

Is a heat pump cheaper than a furnace?

To buy, a gas furnace is often cheaper upfront. To operate, a heat pump is frequently cheaper because it moves heat instead of burning fuel, though the answer depends on your local electricity and gas prices and climate.

What size heat pump do I need?

Most homes use a 1.5- to 5-ton system, roughly 400-600 sq ft per ton as a starting point. Accurate sizing requires a Manual J load calculation rather than square footage alone, since oversizing hurts efficiency and comfort.

Does a heat pump qualify for a rebate in 2026?

The federal 25C tax credit for heat pumps expired December 31, 2025 and no longer applies to 2026 installations. Some heat pumps may still qualify for state or utility rebates, or the income-qualified federal HEAR program, so confirm current eligibility before buying.

Can I save money by buying the heat pump myself?

Yes. The equipment is typically 35-50% of an installed quote, and contractors often mark up the hardware they resell. Buying direct at wholesale and paying separately for licensed installation labor gives you transparency and real savings.

Pricing in this guide reflects typical 2026 U.S. ranges and is for general guidance. Always confirm current equipment pricing, get professional sizing, and verify incentive eligibility for your home.

Your growth is the mission.

National Air Warehouse sells heat pumps at manufacturer-direct, wholesale pricing with free shipping, giving you a transparent view of true equipment cost before labor and markup. Visit the National Air Warehouse homepage to shop heat pumps, or contact our team to compare systems by type, tonnage, and efficiency.