1.5 Ton Goodman 14.3 SEER2 R-32 Single Stage Heat Pump Condenser with 14″ Wide Vertical Cased Evaporator Coil

Goodman GLZS4BA1810 | 18,000 BTU | Heat Pump Outdoor Unit | R-32 Refrigerant | 208/230V | All U.S. Regions

Deliver year-round comfort with the Goodman GLZS4BA1810, a 1.5-ton heat pump outdoor unit offering 18,000 BTUs of both cooling and heating capacity. Ideal for any home in the contiguous United States, this unit pairs with a compatible heat pump coil or air handler to keep your home cool on the hottest days and warm on the coldest. Boasting SEER2 ratings up to 15.2 and HSPF2 ratings up to 7.8, the GLZS4B Series meets the DOE Efficiency Standards for installation in any state. 

Key Features:

• High-efficiency single-stage rotary compressor for reliable, smooth operation
• SmartShift® technology ensures quiet, reliable defrost transitions
• Enhanced aluminum fin coil with copper tubing maximizes heat transfer efficiency
• Factory-installed bi-flow liquid-line filter drier, suction-line accumulator, and compressor crankcase heater
• Factory-installed high-capacity muffler and high/low pressure switches for system protection
• Heavy-gauge galvanized steel cabinet with architectural gray powder paint finish rated for 500-hour salt-spray resistance; removable grille-style top for easy service access
• Pre-charged with environmentally friendly R-32 refrigerant for up to 15 feet of line set
• 3/8″ liquid line and 3/4″ suction line with sweat connections; 208/230V, 1-phase, 60Hz
• 10-year limited parts warranty with online registration within 60 days of installation (5-year without registration) Designed, engineered, and assembled in the U.S.A.

Note: A Goodman Furnace Integration Kit (Model 0230K00044) is required when pairing with a non-A2L furnace. Professional installation by a licensed HVAC contractor is required.

Specs at a Glance: 1.5 Ton | 18,000 BTU | Up to 15.2 SEER2 | 7.8 HSPF2 | R-32 | Single Stage | 208/230V/1Ph/60Hz

Goodman CAPTA2422A3 | 2 Ton Cased Upflow/Downflow Evaporator Coil | R-32 | Internal TXV

Goodman CAPTA2422A3 | 2 Ton A-Coil | All-Aluminum | TXV | R-32 | 14″W x 21″D x 22″H | Upflow/Downflow

Complete your heat pump system with the Goodman CAPTA2422A3, a 2-ton cased indoor evaporator coil with all-aluminum tubing and fins, factory-installed TXV, and full R-32 compatibility. Pressure-tested twice at the factory before leaving, this coil is engineered for longevity, accessibility, and outstanding heat transfer performance.

Key Features:

• All-aluminum construction — tubing, fins, and end plates — for a single-metal solution with proven heat transfer performance
• Optimized for R-32 refrigerant including circuits and manifolds, with an R-32 sensor built to last the life of the coil
• Factory-installed TXV for both cooling and heat pump applications — no field metering device required
• Upflow/downflow configuration with drain pan rails that allow easy coil removal and repositioning without compromising structural integrity
• 21″ depth designed for easier attic access, even in tight spaces
• Galvanized, embossed, and insulated cabinet prevents air leakage and protects internal components
• Rust-resistant, DecaBDE-free thermoplastic drain pan with UV resistance, low water-retention design, and secondary drain connections
• Foil-faced insulation inhibits cabinet condensation
• Single front access panel for straightforward servicing; AHRI certified and ETL listed
• AIM Act 2020 compliant — designed for A2L appliances only; not for use with R-410A systems
• 10-year limited parts warranty with registration within 60 days of installation

Specs at a Glance: 2 Ton | 24,000 BTU | R-32 | TXV Included | Upflow/Downflow | 14″W x 21″D x 22″H | 3/8″ Liquid / 3/4″ Suction Lines | AHRI Certified | ETL Listed

Condenser Specification Sheets
Cased Coil Specification Sheets