2 Ton Goodman 15.2 SEER2 R-32 Single Stage Heat Pump Split System GLZS4BA2410 AMST24BU1300

This matched Goodman system delivers efficient year-round heating and cooling for homes typically in the 1,000–1,300 sq ft range (exact sizing depends on climate, insulation, and load calculation). It uses environmentally preferable R-32 refrigerant and is designed for nationwide compliance.

• SmartShift® technology for quiet, reliable defrost
• Enhanced aluminum-fin coil with 5 mm copper tubing
• Single-speed PSC condenser fan motor
• Factory-installed bi-flow liquid-line filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler
• High- and low-pressure switches
• Heavy-gauge galvanized steel cabinet with architectural gray powder-paint finish and steel louver coil guard
• Top and side service access
• Multi-position installation (upflow, downflow, or horizontal)
• Coil mounting track for easy repositioning
• Cabinet air leakage < 2.0% at 1.0″ w.c. (ASHRAE 193)
• Foil-faced insulation, tool-less filter access, dual drain connections
• SmartFrame-style durable cabinet
• Reliable single-stage performance with good efficiency for everyday comfort and lower operating costs versus older systems.
• Quiet outdoor operation and smooth ECM indoor airflow for better humidity control and even temperatures.
• R-32 refrigerant supports current environmental regulations (A2L-compatible design).
• Factory-installed components simplify installation and improve reliability.
• AHRI-certified and ETL-listed when properly matched and installed.
• 10-year limited parts warranty (registration required).

Outdoor Condenser Unit GLZS4BA2410

• Capacity: 24,000 BTU cooling / 24,000 BTU heating
• Efficiency: Up to 15.2 SEER2 / 7.8 HSPF2 (unit rating commonly listed around 14.3 SEER2; system rating reaches higher when properly matched)
• Compressor: Single-stage high-efficiency rotary
• Sound level: 74 dBA
• Electrical: 208/230V, 1-phase, 60 Hz; MCA 11.2 A; max breaker 15 A
• Refrigerant: R-32 (factory charged for ~15 ft of line set)
• Line sizes: 3/8″ liquid / 3/4″ suction (sweat connections)
• 29″ W × 29″ D × 32½” H
• Approx. 150 lbs (shipping ~165 lbs)

Indoor Air Handler Unit AMST24BU1300

• Capacity: 2.0 ton / 24,000 BTU
• Blower: Direct-drive 9-speed ECM motor (up to 1,215 CFM)
• Coil: All-aluminum evaporator with internal factory-installed TXV (optimized for R-32)
• Electrical: 208/230V, 1-phase, 60 Hz; MCA 5.8 A; max breaker 15 A
• Line sizes: 3/8″ liquid / 3/4″ suction
• Compatible with optional electric heat kits (typically 3–15 kW)
• 17½”–17 9/16″ W × 21″ D × 45″ H
• Approx. 112 lbs

Notes: Professional installation by a licensed HVAC technician is required. Actual SEER2/HSPF2, capacity, and performance depend on proper matching, line-set length, ductwork, and installation quality. Always verify current AHRI ratings and local code requirements. Optional accessories (line sets, pads, electric heat kits, thermostats, etc.) are sold separately.