2 Ton Rheem 16 SEER2 R-454B 96% AFUE 60,000 BTU Two-Stage Variable Speed Multi-Position Gas Furnace Split System

This is a matched Rheem 2-ton cooling / ~56k BTU heating residential split system using low-GWP R-454B refrigerant. It pairs a two-stage outdoor air conditioner with a multi-position cased coil and a high-efficiency two-stage variable-speed gas furnace for year-round comfort, efficiency, and installation flexibility.

Rheem Endeavor Line Classic Plus Series 2-Ton 16 SEER2 Two-Stage Air Conditioner (R-454B) RA16AY24AJ2NA

• Two-stage scroll compressor for precise temperature control, better humidity management, and higher efficiency than single-stage units.
• 7 mm copper condenser coil (requires less refrigerant, smaller/lighter footprint, enhanced reliability).
• Swept-wing fan technology for quieter operation.
• PlusOne Expanded Valve Space (3–4–5 in service valve area, ~27 sq in working space).
• PlusOne Triple Service Access (15 in wide corner access, two-fastener removable corner, individual louver panels).
• PlusOne Refrigerant Detection System (integrated A2L sensor + mitigation board for simplified wiring and automatic outdoor unit shutdown if excess refrigerant is detected).
• Powder-coated finish, rust-resistant screws, external gauge ports.
• ENERGY STAR certified (when properly matched).
• 10-year conditional parts warranty (registration required).
• Runs mostly in lower stage for quieter, more efficient cooling with reduced temperature swings and better dehumidification.
• Lower environmental impact with R-454B (significantly lower GWP than R-410A).
• Easier installation and service access reduce labor time.
• Designed for long-term reliability and lower operating costs.
• Operating dimensions: 25 in H × 33.75 in W × 33.75 in D
• Shipping dimensions: approx. 26.5 in H × 36.38 in W × 36.38 in D
• Weight: ~184 lb (operating), ~190 lb shipping
• Nominal capacity: 24,000 BTU
• SEER2: up to 16–17 (system-dependent; matched ratings typically mid-14s depending on indoor match)
• Sound level: ~69–74.1 dBA
• Voltage: 208/230 V, 1-phase, 60 Hz
• Refrigerant: R-454B (factory charged ~103 oz)
• Liquid line: 3/8 in OD | Suction line: 3/4 in OD
• MCA: ~16 A | Max breaker: 25 A

Rheem/Ruud Endeavor RCFY Series 2-Ton (1.5–2 Ton) Multi-Position Cased Coil (R-454B) RCFY2417STANMC

• Aluminum fins bonded to internally grooved aluminum tubing.
• Factory TXV metering device.
• Multi-position (upflow, downflow, horizontal left/right) – bi-directional airflow, no internal component switching needed.
• Copper sweat refrigerant connections.
• Dual 3/4 in NPT condensate drain connections.
• High-grade, heat-resistant, corrosion-free thermal-set drain pan.
• Factory leak-tested; UV-resistant for germicidal light compatibility.
• Includes A2L refrigerant detection sensor (on most configurations).
• Designed for use with Rheem/Ruud outdoor units and gas/oil furnaces.
• Excellent heat transfer and corrosion resistance.
• Flexible installation in tight or varied spaces.
• Reliable condensate management and system protection with A2L sensor.
• Cabinet: 20–20.5 in H × 17.5 in W × 21.69 in D (approx. 20 in H × 17.5 in W × 21-11/16 in D)
• Weight: ~43 lb
• Nominal capacity: 24,000 BTU
• Face area: ~4.56 sq ft | 2-row coil | 16 FPI
• Liquid line: 3/8 in | Suction line: 3/4 in
• Airflow: typically 525–900 CFM (wet) / 600–1,200 CFM (dry) range depending on application

Rheem/Ruud Endeavor Line Classic Plus Series 96% AFUE Two-Stage Variable-Speed (Constant CFM) Gas Furnace R962V0603A17M4SCAP

• 96% AFUE ENERGY STAR certified.
• Two-stage gas valve (primarily operates at low fire ~60–65% for efficiency and comfort; stages up as needed).
• Variable-speed constant-CFM ECM blower motor (1/2 hp) for precise airflow, superior humidity control, quieter operation, and year-round energy savings.
• EcoNet enabled + Bluetooth diagnostics (contractor app support for setup, monitoring, and troubleshooting; dip-switch-free commissioning on many setups).
• PlusOne Ignition System (direct spark).
• PlusOne Water Management System (patented blocked-drain sensor that shuts unit down and alerts).
• 4-way multi-position (upflow, downflow, horizontal left/right).
• Aluminized steel primary heat exchanger + stainless steel secondary.
• Compatible with natural gas or propane (conversion kit may be required).
• Insulated blower compartment, solid bottom.
• Consistent temperatures and excellent humidity control.
• Lower energy bills and quieter performance vs. single-stage/PSC motors.
• Advanced diagnostics simplify service.
• High efficiency + flexible installation options.
• Cabinet: 34 in H × 17.5 in W × 28.125–29.625 in D
• Weight: ~128 lb
• Input: 56,000 BTU/h (high fire); ~39,200 BTU/h (low fire)
• Output: ~55,000 BTU/h
• Heating CFM (approx.): 1,100 (high) / 990 (low)
• Cooling CFM capability: up to ~1,125–1,250 (supports up to 3-ton AC)
• Voltage: 115 V, 1-phase, 60 Hz
• MCA: ~8–9 A | Max overcurrent: 15 A
• Temperature rise: 30–60 °F (high fire)

This combination delivers efficient two-stage cooling with modern low-GWP refrigerant, paired with a high-efficiency two-stage variable-speed furnace for precise year-round comfort. The matching 17.5 in cabinet widths simplify installation, multi-position flexibility suits a wide range of home layouts, and features like refrigerant detection, expanded service access, and EcoNet/Bluetooth diagnostics improve reliability and ease of maintenance. Proper AHRI-matched installation is required for rated performance, ENERGY STAR qualification, and warranty coverage.

Note: Exact system SEER2/EER2 and capacity depend on the specific AHRI-matched rating. Always confirm local codes, proper sizing (Manual J), and installation by a qualified technician. Specs are compiled from manufacturer data and may vary slightly by production run—verify with current Rheem/Ruud literature or submittal sheets.