If you are a home remodeler, you might find yourself needing to replace the ducts in existing HVAC systems. Whether the duct is in an attic, a basement, or a crawlspace, the wear-and-tear of long-term usage can damage the duct, resulting in leaks that cause air to escape before it can be released into the home. In many cases, ducting needs to be replaced as part of a larger home remodel, in order to ensure that a comfortable climate can be maintained in all rooms of the house.
While the ductwork in an older home may be uninsulated, most of the replacement ducts on the market today are insulated. When you consider the options, you will find that different ducts have different insulation ratings, which are expressed as R-values. You need to understand what the R-value means in order to choose the right one for your home remodeling project.
Thermal Resistance (R-Value) Definition
The United States Department of Energy defines thermal resistance, also known as R-value, as “the insulating material’s resistance to conductive heat flow.” Put more simply, the R-value measures the effectiveness of the insulation material. A material with a higher R-value is a better insulator. Some of the factors that influence R-value include the composition of the insulation material, the thickness of the material, and its density.
The Right R-Value for a Home Remodeling Project
When deciding how high the R-value needs to be for the home remodeling project that you are currently working on, the two main things you need to consider are the climate zone in which you are working and the location of the ducting within the home.
- For homes that are located in a COLD CLIMATE, a high R-value is extremely important. If the ducting is located in an attic, the R-value should be between R6 and R11. For ducting located in a crawlspace or unheated basement, anywhere from R2 to R11 will probably suffice.
- For homes that are located in a MIXED CLIMATE, a high R-value is slightly less important, but it can help to save the homeowner money during the colder months. If the ducting is located in an attic, an R-value between R4 and R8 is sufficient. The range expands if the ducting is located in a crawlspace or unheated basement; anywhere from R2 to R8 will probably work.
- For homes that are located in a WARM CLIMATE, you should still be looking for replacement ducts with R-values between R4 and R8 if the ducting is located in the attic. If the ducting is located in a crawlspace or unheated basement, you can probably get away with no insulation at all, but to be on the safe side and help save the homeowner money, most home remodelers choose ducting with an R2 or R4 value.
If you’re looking to purchase ducting for your home remodeling project, National Air Warehouse offers options with R-values ranging from R4 to R8. Contact us today for more information about our products!